Category: Products & Solutions

[et_pb_section fb_built=”1″ theme_builder_area=”post_content” _builder_version=”4.17.4″ _module_preset=”default”][et_pb_row _builder_version=”4.17.4″ _module_preset=”default” theme_builder_area=”post_content”][et_pb_column _builder_version=”4.17.4″ _module_preset=”default” type=”4_4″ theme_builder_area=”post_content”][et_pb_text _builder_version=”4.17.4″ _module_preset=”default” theme_builder_area=”post_content” admin_label=”Titolo” hover_enabled=”0″ sticky_enabled=”0″] Rocket Solution: towards a new dimension of Warehouse Automation [/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”4.17.4″ _module_preset=”default” column_structure=”1_2,1_2″ theme_builder_area=”post_content”][et_pb_column _builder_version=”4.17.4″ _module_preset=”default” type=”1_2″ theme_builder_area=”post_content”][et_pb_text _builder_version=”4.17.4″ _module_preset=”default” theme_builder_area=”post_content” hover_enabled=”0″ sticky_enabled=”0″] Kardex offers a new micro fulfillment solution that allows you to optimize the space and costs of your warehouse without compromising its performance. In fact, the new Shuttle RSX1 system is an innovative solution that provides maximum storage density while reducing the footprint by 50% with 100% of performance compared to traditional shuttle systems. [/et_pb_text][/et_pb_column][et_pb_column _builder_version=”4.17.4″ _module_preset=”default” type=”1_2″ theme_builder_area=”post_content”][et_pb_image _builder_version=”4.17.4″ _module_preset=”default” theme_builder_area=”post_content” alt=”Kardex – Shuttle RSX1″ title_text=”Immagine1″ src=”https://intralogistica-italia.com/wp-content/uploads/2022/06/Immagine1.png” admin_label=”Foto 01″ hover_enabled=”0″ sticky_enabled=”0″][/et_pb_image][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”4.17.4″ _module_preset=”default” theme_builder_area=”post_content”][et_pb_column _builder_version=”4.17.4″ _module_preset=”default” type=”4_4″ theme_builder_area=”post_content”][et_pb_text _builder_version=”4.17.4″ _module_preset=”default” theme_builder_area=”post_content” hover_enabled=”0″ sticky_enabled=”0″] Equipped with an intelligent software package, it efficiently stores plastic containers weighing up to 50 kg. Thanks to a special gripping device, which does not push the containers but lifts them safely, load handling works regardless of the nature and size of the totes. [/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”4.17.4″ _module_preset=”default” column_structure=”1_2,1_2″ theme_builder_area=”post_content”][et_pb_column _builder_version=”4.17.4″ _module_preset=”default” type=”1_2″ theme_builder_area=”post_content”][et_pb_image _builder_version=”4.17.4″ _module_preset=”default” src=”https://intralogistica-italia.com/wp-content/uploads/2022/06/Immagine2.jpg” theme_builder_area=”post_content” admin_label=”Kardex Rocket Solution” hover_enabled=”0″ sticky_enabled=”0″][/et_pb_image][/et_pb_column][et_pb_column _builder_version=”4.17.4″ _module_preset=”default” type=”1_2″ theme_builder_area=”post_content”][et_pb_text _builder_version=”4.17.4″ _module_preset=”default” theme_builder_area=”post_content” hover_enabled=”0″ sticky_enabled=”0″] The main advantages of this system include: Maximum storage density (multi-depth) with minimum footprint Extreme robustness due to high-quality and durable materials Integration and applicability with standard totes and trays of different heights and conditions Scalability, thanks to modular design that allows for seamless changes in size and performance Low energy consumption For info and contact information: click here [/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]

Bigben Interactive chooses Savoye, cutting-edge of logistics innovation Bigben Interactive relies on the most complete and recent solutions proposed by Savoye, its long-time partner, to have greater logistical innovation in its Lauwin-Planque plan This article is available in Italian only. For further reading, please visit Logisticamente.it website.

[et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text admin_label=”Titolo” _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”] CLS: Simulation as a Service An even more comprehensive consulting service backed by the real value of simulation,which further distinguishes CLS iMation from other system integrators and puts the company and its customers one step ahead in the future of logistics. [/et_pb_text][et_pb_image src=”https://intralogistica-italia.com/wp-content/uploads/2022/05/CLS-Simulazione-ita.jpg” alt=”CLS – Simulation as a Service” title_text=”CLS – Simulazione – ita” admin_label=”Immagine” _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][/et_pb_image][et_pb_text admin_label=”Testo” _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”] In order to complete a truly distinctive service as a system integrator and innovation consultant, CLS iMationhas added a further important element to its own portfolio dedicated to Intelligent Solutions for Logistics Automation: iMation SaaS (Simulation as a Service), a service offered by CLS which is designed to assess the existing condition of a customer’s industrial context so as to identify – through the potential applications of simulation – warehousing aspects and solutions that can be optimised to improve the fluidity of processes. The simulationconstitutes an important and distinctive part of the CLS consultingoffer for assessing the interaction between existing systems and the advantages that can be obtained with the introduction of automatic solutions, in the case of traditional warehouses, or with the reorganisation of work flows for a tangible optimisation of tasks and productivity. Anticipating critical aspects and offering solutions backed by analyses Thanks to the opportunities offered by simulation, CLS is able to show a “preview” of warehouse aspects and solutions and processes that can be optimised. Thanks to timely analyses of data and variables it is possible to assess the interaction between existing systems and arrange alternative scenarios and solutions from the initial development phases. Thanks to in-house skills and development, CLS iMation has created a service like simulation not only to add value to the design from a consulting perspective, but also to integrate an all-round service as a system integrator specialised in the optimisation of intralogistics processes, in order to provide an offer with the utmost flexibility, modularity and scalability. From the design stage of a new plant to the re-engineering of an existing environment or virtual commissioning, CLS is able to practically show – by setting extremely detailed parameters and analyses – how processes can be digitalised and automated in the most efficient way, also by integrating them with traditional systems or machines, based on the inputs and actual needs of the customer which is accompanied step-by-step throughout all the analysis and consulting phases. The right partner to plan for the future in a precise and risk-free way iMation SaaS contains services applicable almost indiscriminately to any industrial context, or to various levels within a production system, including the individual production line, plant flow optimisation and the entire elements and processes of the supply chain. Some of the main advantages offered by simulation are: Reduction of costs and of the time-to-market: changes required on existing systems would not be economically convenient. Through simulation, the costs and times are greatly reduced thanks to the possibility of identifying errors and bottlenecks in advance during a development or upgrading project. Repeatability: through simulation it is possible to observe the behaviour of a machine, plant or the entire production system by imposing or varying certain conditions outside the system, on the basis of the customer’s needs. Besides allowing a plant’s sturdiness to be assessed during any phase of the project, repeatability is useful for taking tactical or operating decisions on the basis of the results that are obtained. [/et_pb_text][et_pb_testimonial author=”Michele Calabrese” job_title=”Head” company_name=”CLS iMation” portrait_url=”https://intralogistica-italia.com/wp-content/uploads/2022/05/Michele_Calabrese_CLS_Imation.jpg” _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”] Besides studying solutions for optimising and automating customer processes, we are motivated to take further steps to offer an even more distinctive service and increasingly efficient solutions capable of predicting and anticipating possible future issues. After having supplied automatic load-handling machines and introduced robot-operated systems for connecting production lines to automatic vehicles, we are now advancing in the simulation. This has a two-fold purpose: firstly, to aid sales activities so that we can show customers the value of our solutions through a realistic vision of the new processes proposed. . Secondly, and above all, to offer even more comprehensive consulting services based on an effort to achieve specific performance targets, as well as to show customers real solutions and scenarios applicable to their situation. The ultimate aim is to provide a Digital Twin that can turn into a tool for end users for collecting and processing data from their own simulated plant, and to help them in the decision-making process at both a strategic and operating level. Moreover, we are assessing applications linked to the 3D vision to offer an immersive and engaging experience to customers since the design phase. [/et_pb_testimonial][/et_pb_column][/et_pb_row][/et_pb_section]

[et_pb_section fb_built=”1″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_row _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”] Blickle: ErgoMove electric drive system Better ergonomics and greater safety [/et_pb_text][et_pb_text _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”] The Client In addition to lifting platforms, the company Janzen Lifttechnik GmbH, based in Niederlangen, Lower Saxony, produces column lifts as well as goods and underfloor lifts. Today, it is not enough for lifting platforms to simply lift and lower loads. For example, pallet cages often have to be tipped so that goods can be removed more easily. The company with twenty employees has a high level of vertical integration and attaches great importance to continuous quality assurance. From design to welding steel structures to final assembly, everything takes place in-house. For the standard lifting tables, Janzen only uses high-quality components that ensure long-term, low-wear operation. [/et_pb_text][et_pb_image src=”https://intralogistica-italia.com/wp-content/uploads/2022/05/Blickle_Kunde_Simple-Stage_Janzen.jpg” alt=”Blicke Kunde Simple Stage” title_text=”Blickle_Kunde_Simple-Stage_Janzen” _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][/et_pb_image][/et_pb_column][/et_pb_row][et_pb_row column_structure=”3_5,2_5″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”3_5″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”] The Challenge Since from the perspective of the company management the market for scissor lift trucks with a load capacity of up to 500 kilograms is dominated by Asian competitors, Janzen took a new course: Janzen successfully established itself in the load range 1,500 to 2,000 kilograms – a sector in which there are only a few other competitors. Over the years, customer inquiries for electrically powered scissor lift trucks have increased continuously. The reason is that heavy pallet trucks are difficult to move by hand. Occasionally, even two persons were necessary to correctly position the trucks with loads. That’s why Janzen set out to design its own drive. In practice, however, the investment in time and materials required for this turned out to be higher than expected. [/et_pb_text][/et_pb_column][et_pb_column type=”2_5″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https://intralogistica-italia.com/wp-content/uploads/2022/05/Blickle_Janzen_foto02.png” alt=”Blickle | ErgoMove” title_text=”Blickle_Janzen_foto02″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][/et_pb_image][/et_pb_column][/et_pb_row][et_pb_row column_structure=”2_5,3_5″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”2_5″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https://intralogistica-italia.com/wp-content/uploads/2022/05/Blickle_Janzen_foto03.jpg” alt=”Blickle Ruota” title_text=”Blickle_Janzen_foto03″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][/et_pb_image][/et_pb_column][et_pb_column type=”3_5″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”] Our Solution ErgoMove enables heavy loads to be moved easily, ensures ergonomically correct working conditions and increases efficiency in internal transport. In addition to the drive assistance, the ErgoMove also features steering and braking assistance. Blickle offers a version of the ErgoMove cockpit with one rotary joystick for extended travel in one direction (without turns). The version with two rotary joysticks makes it possible to easily manoeuvre heavy loads even in confined spaces. Those in charge at Janzen were quickly convinced of the advantages of the system. The specialists from Blickle integrated the ErgoMove control and operating unit into the scissor lift table by slightly modifying the handlebar. In addition, the standard nylon castors previously used were replaced by the Ergomovedrive castors and polyurethaneswivel castors [/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https://intralogistica-italia.com/wp-content/uploads/2022/05/ErgoMove_Titel_Simple_Stage.jpg” alt=”ErgoMove | Blickle” title_text=”ErgoMove_Titel_Simple_Stage” url=”https://www.blickle.it/prodotti/ergomove” _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][/et_pb_image][et_pb_text _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”] The outcome The decision to opt for Blickle has paid off for this privately owned company. “Now heavy scissor lift trucks can easily be moved ergonomically by one person. Loads of up to two tons can now be moved by hand using electrical drive, braking and steering assistance,” says Stefan Winter, Production Manager at Janzen Lifttechnik GmbH. In addition, the noise emissions have been reduced. Previously, hard and therefore loud nylon castors were used. The polyurethane swivel castors from Blickle are suitable for high dynamic and mechanical loads and have low rolling resistance for quiet running. The scissor lift trucks are equipped with an emergency stop switch, dead man’s brakes, a horn and anti-trap protection. To prevent improper use, the operating handles have integrated hand recognition. “In addition to the ergonomics, we have also significantly increased safety,” says a delighted Gerrit Richter designer at Janzen Lifttechnik GmbH. SET EM2000-BS-GBS 200K-ET-2FG: technical information and advantages Works flawlessly independently from the weight. La versione con due joystick rotanti permette di manovrare facilmente carichi pesanti anche in spazi ristretti. Soluzione di sistema da una sola fonte. Condizioni di lavoro ergonomicamente corrette. Maggiore efficienza nel trasporto interno. [/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]

[et_pb_section fb_built=”1″ _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”][et_pb_row _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”][et_pb_text admin_label=”Testo introduttivo” _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”] Winkel: line section lifters A drive and control technology sector company that specialises in systems integration has supplied a major German car manufacturer with a line system for its battery production line. To transport the batteries, cells and cell blocks between the different levels of the plant, the automation specialist relies on around 40 belt lifters from Winkel GmbH. The systems were ready for operation in only six weeks.   [/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”3_5,2_5″ _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”3_5″ _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”][et_pb_text admin_label=”Paragrafo 1″ _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”] Together with a general contractor, the integrator set up line section systems for electric vehicle battery production. Robust, reliable and safe lifting systems in various designs were required to move the batteries, battery cells and cell blocks between the different levels of the assembly lines – and this is why the integrator’s project team turned to Winkel GmbH in Illingen near Stuttgart. The two companies have been working together successfully on a regular basis for many years now. Backed by its extensive experience in the fast and smooth implementation of large-scale projects like this, Winkel supplied the ideal solutions for the customer. “Around 40 different versions of lifters were required, and they all had to be installed quickly,” says Ing. Giorgio Paganelli Azza, the Winkel Italy General Manager. “The vertical lifters had to be up and running in just six weeks.” Focus on safety and functionality Projects like this make intensive and very varied demands on the lifters and their performances. “At the start of the production line, the components to be transported weigh around 25 kilograms – but as production progresses, the weight of the components gets much greater. The end products can reach weights of 700 to 900 kilograms,” says Paganelli Azza. “We supplied uniform lifter designs in light, medium and heavy versions, which we flexibly adapted to the conveyor technology, the products and the loads,” he explains. Despite the tight schedule, the characteristics and requirements of an automotive lifter jack were never ignored. Winkel uses plastic-coated, lubricant-free rollers and linear guides from its in-house production, ensuring a long and low-maintenance service life for use in multi-shift operation. Winkel also chose a flexible concept for all its lifters. This enabled the Winkel designers to perfectly match the various lifters’ support frames to the required position on the belt and adapt them to the universal carriage. The carriages of the lifters were equipped with several adjustable rollers to guarantee smooth and play-free running. In terms of the crucial aspect of safety, Winkel relied on safety brakes, classic catch devices and rod blocking systems. [/et_pb_text][/et_pb_column][et_pb_column type=”2_5″ _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https://intralogistica-italia.com/wp-content/uploads/2022/04/WInkel_2022-04-22_foto01.jpg” alt=”Winkel – Elevatori a cinghia” title_text=”WInkel_2022-04-22_foto01″ admin_label=”Winkel – Elevatori a cinghia” _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”][/et_pb_image][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”][et_pb_text admin_label=”Paragrafo 2″ _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”] The right lifter for every requirement Various belt lifters, designed with single belts and winding mandrel, double belts and counterweight, aluminium profiles and robust steel U or double-T profiles, were used for the various loads. This enabled the designers to create the right solution for every requirement. The belt lifters carry loads of 1kN to 20 kN. The nominal paths range from 500 to 4,000 millimetres. Due to the cycle times, high-speed travel is required on several of these paths. Acceleration of up to three metres per second squared and speeds of up to three metres per second are possible. [/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”2_5,3_5″ _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”2_5″ _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https://intralogistica-italia.com/wp-content/uploads/2022/04/WInkel_2022-04-22_foto02.jpg” alt=”Winkel | Elevatore a cinghia in linea di produzione” title_text=”WInkel_2022-04-22_foto02″ admin_label=”FOTO 03″ _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”][/et_pb_image][/et_pb_column][et_pb_column type=”3_5″ _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”][et_pb_text admin_label=”Paragrafo 3″ _builder_version=”4.17.1″ _module_preset=”default” global_colors_info=”{}”] A cooperative partnership Even if the technical requirements for the components differ, what users expect from the solutions is always the same: “Our partner and its customers expected us to deliver flexible, durable and safe high-quality solutions quickly and on time,” says Paganelli Azza and that’s exactly what we achieved with our lifters”. The users and the project partner were extremely satisfied with the safety and reliability of the systems – and they were also impressed by the uncomplicated, smooth and highly flexible cooperation with Winkel. “Other joint projects such as vertical telescoping units, linear axes and tilting units are already in progress, but I can’t reveal any details about them yet,” says Paganelli Azza. [/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]

Alascom: collaborative robotics with Mobot Alascom, a leading company in Systems Integration in robotics, automation and intralogistics, is always ready to take on challenges, especially in this historical period in which companies are asking to become more resilienti – that is to be able to continue (where possible) to produce while the staff is organized in a flexible way, with non-predefined hours, as the supply chain and production processes have to adapt quickly to changes in market conditions. To meet these demands, the Alascom Research & Development team has developed a mobile collaborative robotics solution combining the peculiarities of the new generation collaborative robotics and the mobility offered by the new autonomous mobile robots (AMR – Autonomous Mobile Robot). The result is called Mobot: a flexible mobile robot capable of automating multiple applications with a high ROI (return on investment). Some of its features The Mobot reduces, by integrating, but can even eliminate the need for a fixed position and non-flexible material transport equipment, such as conveyors. Mobot allows you to tailor fulfillment operations to eCommerce workspaces. This frees up valuable warehouse space to accommodate seasonal peak work and equipment such as movable walls. The Mobot with advanced functionality unlocks a variety of new solutions in distribution and logistics centers. Mobot AL-10 solutions are powerful, highly adaptable and attractive investments given their potential to drive efficiencies that substantially increase margins. After 70 years of slow evolution in mobile robot technology, Mobot AL-10 solutions are now on the verge of truly transforming the supply chain. Despite the long wait, the new pace of change will be disruptive. Contact us to find the MOBOT solution that best suits your needs. Visit our new website and follow us on our social Facebook and Linkedin!

[et_pb_section fb_built=”1″ _builder_version=”4.17.0″ _module_preset=”default” custom_margin=”||0px||false|false” custom_padding=”||0px||false|false” global_colors_info=”{}”][et_pb_row _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text admin_label=”Titolo principale” _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”] Falls and floors: what can increase the risk of slipping? [/et_pb_text][et_pb_text admin_label=”Paragrafo” _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”] An Inail document proposes a technical-scientific review on the slipperiness of flooring. Focus on the technical factors related to the flooring characteristics that can increase the risk of slipping. In relation to its support and cladding layers, flooring is considered, by legislation and technical-building literature, as «the technical element that most affects the risk of falling due to slipping and tripping on the walking surface». [/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”3_4,1_4″ _builder_version=”4.17.0″ _module_preset=”default” custom_margin=”||0px||false|false” custom_padding=”||0px||false|false” global_colors_info=”{}”][et_pb_column type=”3_4″ _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text admin_label=”Paragrafo 2″ _builder_version=”4.17.0″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] However, the analysis of the various personal factors that influence walking, highlights also other relevant aspects. For example, how, in walking, “people associate the biomechanical and kinematic articulation of the steps with the sensory exploration of the spaces they pass through and their technical elements, through sight, touch, smell and hearing”.   Interacting with the floor With the flooring, users establish, therefore, “a physical-perceptive interaction, useful as a cognitive support of the characteristics of the environment and its parts, which affects the physical and emotional attitude that people assume when stepping on a surface”. [/et_pb_text][/et_pb_column][et_pb_column type=”1_4″ _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https://intralogistica-italia.com/wp-content/uploads/2022/04/nastri-antiscivilo-foto-1-.jpg” admin_label=”Sistemi anti-scivolo” _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”][/et_pb_image][/et_pb_column][/et_pb_row][/et_pb_section][et_pb_section fb_built=”1″ _builder_version=”4.17.0″ _module_preset=”default” custom_margin=”0px||0px||false|false” custom_padding=”0px||0px||false|false” global_colors_info=”{}”][et_pb_row _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text admin_label=”Paragrafo #3″ _builder_version=”4.17.0″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] Furthermore, in defining the risk of slipping and falling“the connection between the objective technical, environmental and functional-spatial components of the building and the individual variables connected to the psycho-physical and behavioral characteristics of people is highlighted”. And these characteristics, “in addition to determining a greater or lesser propensity of the subject to slip, are also able to objectively alter the CoF”, the coefficient of friction, because “they determine chemical and physical actions, temporary or definitive, on the surface of the flooring”. [/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”1_3,2_3″ _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”1_3″ _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https://intralogistica-italia.com/wp-content/uploads/2022/04/coprigradini-antiscivilo-foto-2-.jpg” admin_label=”Coprigradini laminati” _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”][/et_pb_image][/et_pb_column][et_pb_column type=”2_3″ _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text admin_label=”Paragrafo #4″ _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”] Precisely because of the importance of knowing the causes and factors that can affect slips and falls, let’s go back to talking about the products that DMR makes available on the market to protect companies and workers on the factors to be considered in assessing the risk of slipping and tripping.   A broad range of targeted solutions The range of certified anti-slip products that the company offers on the market has been diversified, including: stair covers, corners, laminates and fiberglass gratings; a wide range of non-slip adhesive productsfor simple and immediate application and personalized adhesive signswith anti-slip certification. [/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section][et_pb_section fb_built=”1″ _builder_version=”4.17.0″ _module_preset=”default” custom_margin=”0px||0px||false|false” custom_padding=”0px||0px||false|false” global_colors_info=”{}”][et_pb_row _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text admin_label=”Testo conclusivo” _builder_version=”4.17.0″ _module_preset=”default” global_colors_info=”{}”] You’ll find all the information on the products mentioned in the article on our website: www.dmrleanmanufacturing.it. We look forward to seeing you at our stand for the next appointment at Intralogistica Italia 2022! [/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]

[et_pb_section fb_built=”1″ _builder_version=”4.16.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_row _builder_version=”4.16.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.16.0″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″] Savoye realizes the first MFC in Italy   This news is available only in italian. To read more, please visit the website of Logisticamente, official media partner of INTRALOGISTICA ITALIA. [/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]